Table of Contents
Advertisement
Resuming Operation
Whenever the HC700-G screen is off, press the Power Button
(see Figure 1) to resume operation.
Important: When the battery is critically drained, operation
can not be resumed by pressing the Power button. The
HC700-G automatically turns off the screen and Status LED.
The unit maintains its memory content until charged again. To
resume operation, place the HC700-G for charging or replace
battery.
Suspend Mode
Use Suspend mode as often as possible during daily use to
conserve battery power. For power saving, the HC700-G will
automatically turn to Suspend after 1 minute (default). To
configure the time duration before the HC700-G enters Sus-
pend mode, go to: Start Menu -> Settings -> System -> Power
-> Advanced (duration range is 0 to 5 minutes).
To manually shift to Suspend mode - while the HC700-G is
turned on, momentarily press the Power Button (see Figure
1).
During Suspend mode the display turns off and the status
LED inside the Power Button slowly flashes green. To resume
operation, momentarily press the Power Button again.
In Suspend mode, the battery power is conserved by auto-
matically turning off the display and the computer sections of
the HC700-G. During Suspend mode, the radios in use con-
tinue to operate. When the HC700-G resumes operation, it
returns to the program screen shown prior to entering Sus-
pend mode.
12
Advertisement
Table of Contents
