Supero A1SAi-2550F User Manual page 78

A1SAi & A1SRi Series Motherboard User's Manual
If Overwrite SIR Values is set to Enabled, the three items below are available
for configuration:
Hex value of LBC01
Use this feature to select the hex value for LBC01. Use the keypad to enter a
value.
Hex value of LBC23
Use this feature to select the hex value for LBC23. Use the keypad to enter a
value.
Hex value of LBC45
Use this feature to select the hex value for LBC45. Use the keypad to enter a
value.
SATA Port 2/SATA Port 3/SATA Port 4/SATA Port 5
(SATA Ports 4/5 are available on all A1SAi/A1SRi models except for A1SRi-
2358F)
The submenu below allows the user to configure the following settings for SATA
Port 2/SATA Port 3/SATA Port4/SATA Port 5.
Spin Up
On an edge detect from 0 to 1, use this feature to set a COMRESET initialization
sequence for a device. The options are Enabled and Disabled.
External Device
Select Enabled for external SATA device support. The options are Enabled and
Disabled.
Hot Plug
Set this item to Enabled for hot-plugging support, which will allow the user to re-
place a SATA drive without shutting down the system. The options are Enabled
and Disabled.
Mechanical Switch
Select Enabled for mechanical switch support. The options are Disabled and
Enabled.
4-20