Projector Reset Options - Reset Menu - Epson PowerLite 2040 User Manual

Event ID code
0892
0893
0894
0898
0899
089A
089C
089D
Parent topic:

Projector Reset Options - Reset Menu

You can reset most of the projector settings to their default values using the Reset All Config option on
the Reset menu.
Cause and solution
The WPA/WPA2 authentication type does not match. Make sure the wireless
network security settings are correct.
The TKIP/AES encryption type does not match. Make sure the wireless network
security settings are correct.
Communication with unauthorized access point was disconnected. Contact your
network administrator.
Failed to acquire DHCP address. Make sure the DHCP server is operating correctly.
If you are not using DHCP, turn off the DHCP setting in the Network menus.
A communication error has occurred. Try restarting the EasyMP Network Projection
program and restarting your projector. If that does not solve the problem, contact
Epson for help.
The EAP authentication type does not match the network. Check the wireless LAN
security settings and make sure that the security certificate is installed correctly.
EAP server authentication failed. Check the wireless LAN security settings and
make sure that the security certificate is installed correctly.
Key exchange failed. Check the wireless LAN security settings and make sure that
the security certificate is installed correctly.
Projector Information Display - Info Menu
169