Solving Network Problems; Solutions When Wireless Authentication Fails; Solutions When You Cannot Access The Projector Through The Web - Epson PowerLite 2040 User Manual

• Make sure the cables meet the HDMI standards.
• Make sure the connected device supports the CEC standards.
• If you connected a new device or changed any connections, you may need to restart the device.
• Connect no more than three devices that support HDMI Link at the same time.
• If you have connected a speaker or receiver, set the output to PCM.
Parent topic:

Solving Network Problems

Check the solutions in these sections if you have problems using the projector on a network.

Solutions When Wireless Authentication Fails

Solutions When You Cannot Access the Projector Through the Web

Solutions When Network Alert E-Mails are Not Received
Parent topic:
Solutions When Wireless Authentication Fails
If you cannot authenticate a wireless connection, try the following solutions (PowerLite
975W/2055/2065/2155W/2165W/2245U/2250U/2255U/2265U):
• If the wireless settings are correct, but authentication fails, you may need to update the Date & Time
settings on the Extended menu, if available.
• Make sure the Wireless LAN Power setting is set to On.
• Check the Security settings and passphrase in the Network Configuration menu.
Parent topic:
Related references
Projector Network Settings - Network Menu
Related tasks
Selecting Wireless Network Settings Manually
Solutions When You Cannot Access the Projector Through the Web
If you are unable to access the projector through a web browser, make sure you are using the correct ID
and password, which are case sensitive.
• For the user ID, enter EPSONWEB. (You cannot change the user ID.)
Solving Projector or Remote Control Operation Problems
Solving Problems
Solving Network Problems
205