Solutions When The Image Is Not Rectangular - Epson PowerLite 2040 User Manual

• Try adjusting the image position using the Position menu setting.
• Press the Aspect button on the remote control to select a different image aspect ratio.
• If you zoomed into or out of the image using the E-Zoom buttons, press the Esc button until the
projector returns to a full display.
• Check the cables connecting the computer or video source to the projector. Try connecting different
cables.
• Check your computer display settings to disable dual display and set the resolution within the
projector's limits. (See your computer manual for details.)
• Check the resolution assigned to your presentation files to see if they are created for a different
resolution than you are projecting in. (See your software help for details.)
Parent topic:
Related references
Input Signal Settings - Signal Menu
Supported Video Display Formats

Solutions When the Image is Not Rectangular

If the projected image is not evenly rectangular, try the following solutions:
• Turn on automatic keystone adjustments using the projector's menus.
• Place the projector directly in front of the center of the screen, facing it squarely, if possible.
• If you adjusted the projector height using the projector feet, press the keystone buttons on the
projector to adjust the image shape.
• Adjust the position of the projector's horizontal keystone slider (PowerLite 2040/2140W).
• Press the Screen Fit button and adjust the image shape using the on-screen display (PowerLite
975W/2040/2055/2065/2140W/2155W/2165W/2245U/2250U/2255U/2265U).
• Adjust the Quick Corner setting to correct the image shape.
Parent topic:
Related concepts
Image Shape
Related references
Projector Feature Settings - Settings Menu
Solving Image or Sound Problems
Solving Image or Sound Problems
198