CARE AND MAINTENANCE
Disconnect the power source before working on the
unit. Routine maintenance must be done every year.
CAUTION:
1. Never use gasoline, benzene, thinner or any other
such chemicals to clean the ventilating fan.
2. Do not allow water to enter the motor.
3. Do not soak resin parts in water over 140°F (60°C).
CLEANING
1. Pull down the springs (and power connects of the
LED light engine if SMT150LED) to remove the grille.
2. Wash and clean the grille. CAUTION: Do not let water
into the LED light engine. (Use non-abrasive kitchen
detergent and wipe dry with a new cloth.)
3. Using a cloth dampened with non-abrasive kitchen
detergent, remove any dirt from the ventilating fan.
Wipe dry with a clean cloth.
4. Replace the grille.
9
Model:
SMT130/SMT130H/SMT130M/SMT150/SMT150D/
SMT150LED