Alarm Triggers And Shock Sensor - CrimeStopper SP-102 Owner's Manual

Alarm Trigger Diagnostics (This feature is only available w/Active Rearm Enabled)
If the system was triggered when you were away from your vehicle, the system will give 4 chirps and flashes from the parking lights
when you disarm the system. After you Disarm the system the LED will flash a sequence giving you which trigger was activated. The
graph below will show what the different flashes represent.
• 1 Flash – Ignition was turned ON
• 3 Flashes – Door, Hood or Trunk trigger
• 4 Flashes – Shock Sensor
Alarm Trigger Reset - After the alarm has been triggered, you will need to reset the system by turning the ignition to the ON position
then turning the ignition to the OFF position. Once you rearm the vehicle all of the triggers will be reset.
Shock Sensor - This system does come with a dual stage shock sensor. What this means is that it will offer both a warn away as well
as full alarm with different impact sensitivity.
Warn Away - This is for light impacts such as someone kicking a tire. Once a warn away impact is registered, the system will chirp the
siren 5 times and flash the parking lights once to alert anyone in the area.
Full Alarm - This is for heavy impacts such as door window being broken. Once a full alarm impact has been registered, the system will
trigger the full siren and multiple parking light flashes.
ALARM TRIGGERS
SHOCK SENSOR
7