Definitions: Safety Guidelines; General Power Tool Safety Warnings - DeWalt DWS535 Instruction Manual

Heavy-duty 7-1/4" (184 mm) worm drive circular saw
Hide thumbs Also See for DWS535:
Table of Contents

Advertisement

Available languages

Available languages

Definitions: Safety Guidelines

The definitions below describe the level of severity for
each signal word. Please read the manual and pay
attention to these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
NOTICE: indicates a practice not related to personal
injury which, if not avoided, may result in property
damage.
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR
WALT TOOL, CALL US TOLL FREE AT: 1-800-4-D
ANY D
e
(1-800-433-9258).
WARNING: To reduce the risk of injury, read the instruction
manual.

General Power Tool Safety Warnings

WARNING! Read all safety warnings and all instructions
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
SAvE ALL WArninGS AnD
inSTrucTionS
for fuTurE rEfErEncE
The term "power tool" in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
1) Work area SaFeTy
a) Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2) eleCTrICal SaFeTy
a) Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces
WalT
e
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is earthed
or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
shock.
d) Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dws535t

Table of Contents