Programming The Time And Date - Sundance Spas Maxxus Owner's Manual

C. Service Lock (Figure 12.8b):
1. Tap to lock the spa. When this feature is activated all the lock
buttons are highlighted.
2. Tap
number from 0-9. Then move on to the next number until a four-digit
code has been selected.
3. Tap to activate the locking feature.
4. All spa functions are locked to allow for a temporary service mode
such as filter cleaning.
Note: This mode has a time out of 2 hours. The spa should not be left
in this lock mode for an extended period. Especially in colder climate or
when freezing conditions exist.
D. To Unlock (Figure 12.8c):
1. Enter the Lock menu. The type of lock that is
active will already be highlighted.
2. Tap
the code. Then move on to the next number
until the four-digit unlock code has been
entered.
3. Tap to unlock.
4. Tap to return to the "Setting" Menu.
12.9

Programming the Time and Date

From the Settings Menu, tap
menu tab. Tap
12.9a and 12.9b.
A
A
Figure 12.9a
A. To set the time:
The default time setting is a 12-Hour configuration. To choose the
24-Hour configuration, then tap
1. When you enter the menu, a few of the icons
will be highlighted, Figure 12.9c.
2. Tap or
increments. To switch from "AM" to "PM" you
must round a 12-Hour period.
3. Tap the minute block
4. Tap or
5. Tap to confirm and save your changes.
(block) to select a number. Use
(the first block) to start entering
to enter the programming options, Figures
Time & Date
SETTINGS
Lock
Time & Date
Language
to change the hour in 1-hour
8:00
to program.
to change the minutes.
or to highlight the "Time & Date"
A
A
Time & Date
Time
Figure 12.9b
to change the setting.
Time
880 SERIES
or to select a
A
A
Lock
Figure 12.8c
8:00
PM
Date
A
A
Time & Date
8:00
Time
Figure 12.9c
PM
Date
Page 63