Location For The Optional Sunsmart™ 2.0 System - Sundance Spas Maxxus Owner's Manual

4.3 Location for the Optional SunSmart™ 2.0 System
IMPORTANT! Choose an installation site with the front control panel
side pointing towards your home's Wi-Fi router.
CAUTION: You must make sure that the spa control panel side
has a clear unobstructed line-of-site of the home Wi-Fi router. This
action ensures maximum signal strength between the spa and your
home's Wi-Fi router.
Verify your home router's Wi-Fi strength at the proposed spa location.
Front control panel side of spa must point towards your home's Wi-Fi
router in your home as illustrated, Figure 4.3a. Stand near the proposed
front control panel side of the spa with your cell phone, then login to the
internet using your home Wi-Fi router signal (not 3G or 4G) and verify
results as follows:
If the home Wi-Fi router signal is strong (3-4 bars) and Internet access is
stable, the proposed installation site is a good choice.
If the home router's Wi-Fi signal is weak and Internet access is slow or
produces an error, the proposed installation site is not a good choice.
• It may be necessary to choose another spa installation site.
• Relocate your home Wi-Fi router closer to the spa.
• Install a "repeater" device in the room closest to the spa to boost the
home's router Wi-Fi signal at the proposed spa installation site.
Home WiFi
Router
880 SERIES
Figure 4.3a
Page 11