Menu: Communication - ABB PositionMaster EDP300 Operating Instruction

8.4.6

Menu: Communication

... / Communication
Menu / Parameter Value range
HART version HART 5
HART 7
Off 1)
Find Device Once
Find Device Continuous
1) Parameter only visible if HART 7 has been selected
44 OI/EDP300-EN | PositionMaster EDP300
Description
Use this parameter to define the HART protocol via which the device is to communicate.
HART 5 – HART 5.9
HART 7 – HART 7.2
1)
1)
IMPORTANT (NOTE)
If the HART protocol selected does not match the one for the HART master, it will
not be possible for communication to take place.
If "Find Device Once" is selected, after HART command #73 is received the device responds once
with HART command #73, which has the same content as command #0.
If "Find Device Continuous" is selected, after HART command #73 is received the device
responds repeatedly with HART command #73, which has the same content as command #0.
Selecting the "Off" parameter ends the "Find Device" function.