Preparing To Install; Environmental And Power Specifications; Unpacking The Unit And Preparing The Installation; Locating Serial Numbers - Cisco expressway ce1100 Installation Manual

Cisco Expressway CE1100 Appliance Installation Guide

Preparing to Install

Preparing to Install

Environmental and Power Specifications

To view environmental and power specifications for the appliance server, see
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C220M4/install/C220M4/spec.html.
Note: If migrating from an older appliance, be aware—while efficient once running—the CE1100 is capable of
consuming more power. It has a larger capacity and has greater inrush at power-on. Also, unlike the first-generation
appliance or the CE500, it has two power supplies. Refer to the power specifications for more information.

Unpacking the Unit and Preparing the Installation

See http://www.cisco.com/en/US/docs/unified_computing/ucs/c/hw/C220/install/install.html
Unpacking and inspecting the server.
■
The CE1100 is shipped with 2 x 10 Gb fiber SFPs and 2 x 1 Gb copper SFPs.
Installation guidelines.
■
Rack requirements.
■
Equipment requirements.
■
Slide rail adjustment range.
■

Locating Serial Numbers

The Cisco Expressway appliance displays two serial numbers:
UCS serial number:
■
Has the format FCHxxxxxxxx.
—
Is displayed on the hardware's pull-out tab and in the CIMC web interface.
—
Application/Software serial number:
■
Has the format 52DNNNNN, where D indicates the CE1100 series and N are numbers.
—
Is displayed in the Cisco Expressway web interface, on the underside of the pull-out tab, and is available in
—
the SSH session.
Must be supplied to obtain release and option keys.
—
7
for information on: