Using The Cable Ties; Using The Lens Gap Cover - Sony VPL-FH500L Quick Reference Manual

Using the Cable Ties

1
Aim the supplied cable tie in a
horizontal direction with respect to the
front face of the projector then insert
the cable tie through the hole at the
bottom.
Be sure to insert the cable tie in fully
until it clicks.
Front direction
of the projector
2
Bundle the cables and cords with
attached cable tie.
When you remove the cable tie
Rotate 90 degrees the cable tie.
8
GB
Checking the Supplied Accessories
Cable tie
Hole of bottom

Using the Lens gap cover

If you attach the small caliber lens to the
projector that it may see the inside of the
projector. In this case, attach the supplied
lens gap cover to the front panel as
illustrated.
Lens gap cover