Removing The Stator - PIAGGIO MSS X9 Evolution 250 Workshop Manual

Engine

Removing the stator

- Remove the two pickup screws and the screw
holding the wiring support and the three stator
clamping screws shown in the figure.
- Remove the stator and its wiring.
Refitting the stator
- Refit the stator and flywheel carrying out the re-
moval procedure in reverse, tightening the retain-
ers to the specified torque.
Locking torques (N*m)
Stator assembly screws (°)
Refitting the flywheel cover
- Position the spline clip on the crankshaft and ori-
ent the end as shown in the figure.
ENG - 102
Downloaded from www.Manualslib.com
3 ÷ 4
manuals search engine
MSS X9 Evolution 250