Cisco Nexus 5000 Series Nx-Os Layer 2 Switching Configuration Guide, Release 5.1(3)N1(1 - Cisco nexus 5000 series Configuration Manual

Verifying the Consistency of Port Channel Numbers
Command
switch# show feature
switch# show running-config vpc
switch# show vpc brief
switch(config)# show vpc consistency-parameters
global
switch(config)# show vpc consistency-parameters
interface port-channel channel-number
For detailed information about the fields in the output of these commands, see the command reference for
your device.
Verifying the Consistency of Port Channel Numbers
For enhanced vPCs, both switches must use the same port channel number for the dual homed connection to
a FEX. If different port channel numbers are used, the port channel and its member ports are suspended on
both switches.
SUMMARY STEPS
1. show running-config interface type/slot[, type/slot[, ...]]
2. show interface type/slot
DETAILED STEPS
Command or Action
Step 1 show running-config interface type/slot[,
type/slot[, ...]]
Example:
switch-1# show running-config interface
Ethernet110/1/1, Ethernet111/1/1
Step 2
show interface type/slot
Example:
switch-1# show interface Ethernet110/1/1

Cisco Nexus 5000 Series NX-OS Layer 2 Switching Configuration Guide, Release 5.1(3)N1(1)

154
Purpose
Displays whether vPC is enabled.
Displays running configuration information for vPCs.
Displays brief information on the vPCs.
Displays the status of global vPC parameters that
must be consistent across all vPC interfaces.
Displays the status of specific port channels that must
be consistent across vPC devices.
Purpose
Displays the configuration of the specified list of port channel
member ports.
Enter this command on both peer switches and compare the reported
channel-group numbers to verify that they match between switches.
Displays the status and configuration of the specified port channel
member port.
Enter this command on both peer switches and verify the status of
the ports.
Configuring Enhanced Virtual Port Channels
OL-25842-01