Ipl The Director From The Hafm Appliance; Reset The Director From The Ctp Front Panel - HP storageworks director 2/140 Service Manual

Repair Information

IPL the Director from the HAFM Appliance

To IPL the director from the HAFM appliance, perform the following:
1. Open the HAFM application. The View All - HAFM 8 main window displays.
2. Double-click the icon representing the director to be IPLed. The Hardware
3. Choose Maintenance > IPL. The Information dialog box displays, as shown
Figure 51: Information dialog box
4. Click Yes to IPL the director. During the IPL, the director-to-HAFM

Reset the Director from the CTP Front Panel

To reset the director from the CTP front panel, perform the following:
1. Press and hold the RESET button for approximately three seconds.
198
— As the network connection drops, the Director 2/140 Status table turns
yellow, the Status field displays No Link, and the State field displays
Link Timeout.
— The status bar at the bottom of the window displays a grey square,
indicating director status is unknown.
— Illustrated FRUs disappear, and appear again as the connection is
re-established.
View for the selected director displays.
in Figure 51.
appliance Ethernet link drops momentarily and the following occur at the
Element Manager:
— As the network connection drops, the Director 2/140 Status table turns
yellow, the Status field displays No Link, and the State field displays a
reason message.
— In the HAFM Physical Map, the director icon displays a grey square,
indicating director status is unknown.
— Illustrated FRUs in the Hardware View disappear, and display again as
the connection is reestablished.
Director 2/140 Service Manual