Siemens OpenStage 20 E Installation And Quick Reference Manual page 7

Hide thumbs Also See for OpenStage 20 E:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 5
Installing the Cables at the SIP/HFA Phone
See the appendix from
1. Insert the LAN cable into the jack
2. If your LAN does not have PoE (Power over Ethernet; ask your service personnel), then you
need to use a power supply.
Insert the power supply plug into the jack
To prevent damage to the unit, it is imperative that you observe the following:
The power supply may only be plugged into the
3. All other jacks are optional:
: LAN connection to PC.
: Connection to Headset
: Connection to KeyModule, Busy Lamp Field
: USB master, e.g. for a USB memory stick
To prevent damage to the unit, it is imperative that you observe the following:
If an USB memory stick should be connected to the USB interface, an adaptor cable (or-
der no.: C39195-Z7704-A5) has to be used.
The unit is now ready for operation.
If further settings are required for correct operation of the telephone, contact your service per-
sonnel.
Installing the Cables at the TDM Phone
See the appendix from
1. OpenStage 20/40 T:
Insert the U
cable into the jack
P0/E
OpenStage 40 T with Key Module, OpenStage 60/80 T:
Insert the U
cable into the jack on the power supply and connect the other jack on the
P0/E
power supply with jack
To prevent damage to the unit, it is imperative that you observe the following:
The power supply may only be plugged into the
2. All other jacks are optional:
: Connection to Headset
: Connection to KeyModule, Busy Lamp Field
(left): USB slave for connection to the PC ("1st party CTI")
(right): USB master, e.g. for a USB memory stick
To prevent damage to the unit, it is imperative that you observe the following:
If an USB memory stick should be connected to the USB interface, an adaptor cable (or-
der no.: C39195-Z7704-A5) has to be used.
The unit is now ready for operation.
If further settings are required for correct operation of the telephone, contact your service per-
sonnel.
1.
Not OpenStage 20 E/20
2.
OpenStage 60/80 only
page I.
on the base of the telephone.
1
.
page IV.
on the base of the telephone.
on the base of the telephone.
[1]
.
on the base of the telephone.
jack.
[1]
.
2
.
jack.
[1]
.
[1]
.
[2]
.
Installation
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Openstage 20 g

Table of Contents