Section Two - Preventive Maintenance; Daily Maintenance; Weekly Maintenance - Precor RBK 815 Service Manual

Section Two - Preventive Maintenance

Preventive maintenance measures are either scheduled or unscheduled. Scheduled
preventive maintenance activities are included here so that you are aware of
preventive measures performed on a regular basis.
Regular Preventive Maintenance (Owner)
Cleanliness of the cycle and its operating environment will keep maintenance
problems and service calls to a minimum. Precor recommends that you perform the
following preventive maintenance schedule.
After Each Use
• Turn off and, unplug the power adapter (if equipped) from the bicycle.
• Wipe down the covers, handlebars, seat and pedals with a damp cloth.

Daily Maintenance

Clean the bicycle's frame, covers, seat and pedals using a water damped cloth. Wipe
the surface of the electronic console with a damp sponge or soft cloth. Dry with a
clean towel.

Weekly Maintenance

• Clean underneath the bicycle, following these steps:
1.Turn off the bicycle with the on/off switch, then unplug it from the power
adapter
2.Place the bicycle on its side.
Note:
Place a drop cloth under the bicycle to protect the flooring and to ensure that the
cycle handrail is not scratched or damaged.
3.Vacuum the rug or damp mop the floor.
4.Make sure that the floor is dry before returning the bicycle to an upright
position.
(if equipped).
RBK 815 Recumbent Cycle
Page 6