Robot Coupe Robot Cook Manual page 9

- Read a programme:
Once the programme has been chosen using the key
, press on the step button
using the rotary dial.
You have the possibility of registering 9 programmes
on your Robot Cook .
®
3 recipes are already pre-programmed, (see page
23):
Programme 1: Béchamel
Programme 2: Custard
Programme 3: Confectioner's custard
After each step of the programme, a bell will ring to
indicate that the programme is moving onto the next
step.
- Create or modify a programme:
By pressing once on the Programme Function
you then obtain the desired programme by using
the rotary dial. It allows you to choose from the
programmes 1 - 9.
For each step of the programme
following parameters:
Heat power and Temperature
Speed
Timer
To create or modify a step, choose the desired step
by pressing the switch for a few seconds
will allow you to enter your parameters.
After entering your parameters, confirm them by
pressing the step switch
them.
- Delete a step:
Go to the step to be deleted, press the step switch
for a few seconds and then press the red stop
switch to delete the step.
22
The active step has now been replaced by the next
step.
to view all the steps When all steps have been deleted, the programme
is deactivated.
The word End is displayed at the last step. During
operations, the programme will stop at this point.
, you enter the
, which
again so as register