You Have Just Acquired A Robot Cook; Switching On The Machine; Advice On Electrical Connections; Control Panel - Robot Coupe Robot Cook Manual

YOU HAVE JUST ACQUIRED A
Robot Cook
®
The Robot Cook is a Cutter-Emulsifier-Heater
®
perfectly adapted to the needs of professionals.
It will be of great service to you which you will
gradually discover as you use it.
The Advantages of Robot Cook
- Cutter function with a bottom bowl blade.
- Maximum liquid capacity of 2.5 litres.
- Precise temperature control of 1° or 2° C.
- Heating capacity up to 140° C.
- Programming function for 9 recipes.
Your Robot Cook is equipped with the following
®
accessories:
- 3.7 litre stainless steel bowl.
- Micro-serrated stainless steel blades.
- Lid and bowl scraper arm.
ON/OFF
(behind the machine)

CONTROL PANEL

Pulse Switch
20

• ADVICE ON ELECTRICAL CONNECTIONS

Before plugging in, check that your power supply
corresponds to that indicated on the machine's
identification plate.
:
®
AN EARTHED SOCkET (RISk OF ELECTROCUTION).
Robot Cook
This model is adapted to
The standardized plug must be calibrated to a
minimum of 10 amps, and preferably 16 amps, if
the appliance is used intensively.
• CONTROL PANEL
Run Switch
Stop Switch
SWITCHING ON
THE MACHINE
W A R N I N G
THIS APPLIANCE MUST BE PLUGGED INTO
®
220-240V / 50-60Hz

SETTINGS

Low and High Heat Function
Speed Function
Timer Function
PROGRAMMING
Programme Function
Step Button
Rotary Dial
(parameter setting)
- Power supply:
The general power supply is turned
off by the black switch located at
the back of the machine.
• SETTINGS:
Switches:
Low heat .
Heat:
High heat .
Speed:
Timer:
Allow you to respectively choose temperature (°C),
speed (rpm) and time (min).
The rotary dial is designed to regulate the chosen
parameter (temperature, speed, time).
For example: after pressing the speed button, you
regulate the speed using the rotary dial; the chosen
speed is displayed on the speed line.
- Settings:
The small arrow shows the parameter
where the rotary dial is active.
1. Low and high heat function:
2 possibilities:
Adjustable temperature from 20°C - 140°C.
Low heat (small flame):
High heat (big flame):
You press the heat switch once to select low heat.
Then use the rotary dial to select the desired
temperature.
Press twice on the heat switch
Then use the rotary dial to select the desired
temperature (big flame displayed).
to select high heat.