Summary of Contents for Robot Coupe R 301 Dice Series
Page 1
• R 301 Dice • R 301 Dice Ultra P.O. Box 16625, Jackson, MS 39236-6625 280 South Perkins St., Ridgeland, MS 39157 e-mail: robocoup@misnet.com - website: www.robotcoupeusa.com Phone : 1-800-824-1646...
Page 2
Robot Coupe can in no way be held responsible • WARNING-some of the parts are very sharp e. g. for the user’s failure to follow the basic rules of blades, plates … etc.
SUMMARY WARRANTY ACCESSORIES • Serrated blade IMPORTANT WARNING • Fine serrated blade • Citrus-juicer INTRODUCTION TO YOUR NEW R 301 Dice • R 301 Dice Ultra Series “D” CLEANING • Attachment SWITCHING ON THE MACHINE • Motor base • Advice on electrical connections •...
Page 5
Service Agency of the possibility of scratched, stained, chipped, pitted, dented or warranty coverage and provide a Neither ROBOT COUPE U.S.A., INC. nor its discolored surfaces, blades, knives, attachments copy of the dated sales or delivery affiliated companies or any of its distributors, di- or accessories.
Robot Coupe can in no way be held responsible • WARNING-some of the parts are very sharp e. g. for the user’s failure to follow the basic rules of blades, plates … etc.
INTRODUCTION TO • CONTROL PANEL 3) Place the blade onto the motor shaft. Rotate YOUR NEW R 301 Dice • R 301 Dice / R 301 Dice Ultra the blade until it drops R 301 Dice Ultra Series “D” Red switch Off switch into place.
5) Push the on button, and with a firm grip on the 4) Place the cutting plate • Position 2 : Using the cylindrical hopper. fruit, press it down onto the cone. When the juice of your choice onto the In this case, the grid has been exctracted, press the off button.
Place the matching • BOWL ATTACHMENT EMULSIFY slicing plate onto the The cutter bowl is used for grinding, kneading, discharge plate. You Mayonnaise / ailloli / pureeing, blending, mixing, and emulsifying. Before may need to rotate the remoulade sauce placing the product in the bowl some plate a bit until it drops Hollandaise / béarnaise products such as meats and cheeses should be...
HOW TO USE THE LARGE FEED OPENING ACCESSORIES • ATTACHMENTS : Raise the pusher handle, and fill the opening with Remove all attachments before cleaning. The bowl the product. If the opening is overfilled the machine and continuous feed attachments should be cleaned •...
• BLADE AND CUTTING PLATES SAFETY Blades should be kept sharp. It is not necessary The R 301 Dice / R 301 Dice Ultra are fitted with to have a razor edge. However, they will need a mechanical magnetic safety device and motor sharpening periodically.