Setting Menu Screen - Panasonic AK-UB300G Operating Instructions Manual

2 [Select the firmware folder]
Displays the folder storing the firmware file to write to AK-UB300G.
3 [Firmware file information]
Displays the firmware version of the selected firmware file.
4 [Execute]
Clicking the [Execute] button will start the update of AK-UB300G with the selected firmware file.
A progress bar is displayed during the update.
@ NOTE
t The unit may reset or output image may be disrupted during the update.

Setting menu screen

This is the screen displayed when any button in [Main Menu] is clicked.
(Example) When the [PAINT] button is clicked
1 Tab page switch button
A tab is assigned for multiple pages for the menu with many items in the setting menu. Pages are switched by this button.
2 Menu tab
The category of the displayed setting menu is assigned for each tab.
Clicking the tab will switch to the category to display.
3 Setting area
This is the area for the setting menu. There are combo box, slider, radio button, push button, etc., depending on the setting value. The displayed
setting value is synchronized with the setting value in AK-UB300G.
@ NOTE
t Not all the setting menus are supported in [Main Menu] of the UB300 Setting Tool. Change those at AK-UB300G itself.
t Confirm the actual displayed screen for the items that can be changed by [Main Menu] of UB300 Setting Tool.
t The items that can be changed from [Main Menu] of UB300 Setting Tool may change without prior notice.
t The setting value of the displayed setting menu may not match with the connected AK-UB300G depending on the network environment or the status
of the operating personal computer. In such case, confirm if there is any problem in the operation environment.
Chapter 7 UB300 Setting Tool — Operation
– 96 –
1
2
3