ELNA Star Edition Service Manual page 25

Step and items
to check
01) Turn on the power switch while
7 - segment simultaneously pressing the needle
up/down button and start/stop button.
LED
Press the start/stop button five times
to select menu item "6" . Press needle
up/down button: The LED indicate "01"
for one second. If you do not press
the needle up/down button within 2.5
seconds, the machine automatically
revert to the normal sewing mode.
02) Press needle up/down button, LED
displays "02" for one second.
Mode LED
Press needle up/down button, LED
03)
displays "03" for one second. Press
Button
buttons S1 - S8.
S1 S2 S3 S4 S5 S6 S7 S8
Press needle up/down button, LED
04)
Bobbin winder display "04" for one second.
switch Move the bobbin winder spindle to the
right.
Return it to the left.
05)
Presser foot
lifter switch
(Not applicable
to this model)
06) Press needle up/down button, LED
displays "06" for one second.
Buttonhole
Lower the buttonhole lever.
Sensor
Move the buttonhole lever back and
forth.
Procedure
Beeping sound when the button pressed.
LED display "8.8". And it blinks in one
second intervals.
7-segment LED displays "Ld" and
3 mode LEDs blink in one second
intervals.
LED display
Button number is displayed when the
button is pressed.
LED displays "11".
LED displays "L" or "H".
When the buttonhole lever
is pull, LED displays "H".
When the buttonhole lever
is free (positioned in the
center), LED displays "L".
When the buttonhole lever
is pushed, LED displays
"H".
Correct Condition
LED
LED
S1 S2
(Left)
(Right)
23