Philips HQ8260 User Manual page 20

ENGLISH
22
4222.002.4998.2.indd 22
1 Switch off the shaver and disconnect it from
the mains.
2 Push the trimmer slide downwards to open
the trimmer.
3 Clean the trimmer with the short-bristled side
of the cleaning brush. Brush up and down along
the trimmer teeth.
4 Close the trimmer ('click').
Tip: For optimal trimming performance, lubricate the
trimmer teeth with a drop of sewing machine oil every
six months.
Storage
There are three ways to store the shaver or to take
it with you when you travel:
- put the shaver in the Jet Clean system. Make sure
the protection cap is not on the shaving unit.
Note: If you do not want the shaver to charge while it is
stored it in the Jet Clean System, just leave the lever in
the upright position
- put the protection cap on the shaver to prevent
damage.
- store the appliance in the pouch supplied.
27-02-2009 11:34:29