6-2. Customization
1
*
: In this case, the power back door operation will be made only by push and hold.
2
*
: The back door can be opened using the wireless remote control after unlock-
ing the back door.
3
*
: The settings can be changed when the mechanical key linked operation of the
power window is set to ON.
4
*
: The settings can be changed when the wireless remote control linked operation
of the power window is set to ON.
5
*
: The settings can be changed when the entry function linked operation of the
power window is set to ON.
6
*
: Vehicles sold outside Canada
Vehicle customization
■
If the smart access system with push-button start is turned "OFF", unlock door
●
cannot be selected.
If the doors are not opened after locking and are then automatically re-locked, a
●
signal will be given if "Operation signal (Emergency flashers)" or "Operation
signal (Buzzer)" are set to ON.
When setting using the vehicle switches
■
When using the vehicle switches to set an item that can also be set using the touch
screen, the item displayed on the touch screen will not change immediately.
If the "ENGINE START STOP" switch is first turned to OFF, the screen display will
change once the "ENGINE START STOP" switch is turned to IGNITION ON
mode again.
When customizing using the touch screen
■
Stop the vehicle in a safe place, apply the parking brake, and shift the shift lever to
"P". Also, to prevent battery discharge, leave the engine running while customizing
the features.
726
LX570_U (OM60F86U)