1-2. Opening, closing and locking the doors
Switching the door unlock function
■
If it is possible to set which doors the entry function unlocks using the wireless
remote control.
Turn the "ENGINE START STOP" switch OFF.
STEP
1
When the indicator on the key surface is turned off, press and hold
STEP
2
for approximately 5 seconds while pressing
The setting changes each time an operation is preformed, as shown below. (When
changing the setting continuously, release the buttons, wait for at least 5 seconds,
and repeat
STEP
Multi-information
display
Unlock the doors using the wireless remote control and open one of the
STEP
3
doors.
If a door is not opened within 60 seconds after
locked again and the alarm will automatically be set. In case that the alarm is trig-
gered, immediately stop the alarm. (P. 118)
38
LX570_U (OM60F86U)
.)
2
Unlocking function
Hold the driver' s door handle
to unlock only the driver' s
door.
Hold either door handle to
unlock all doors.
on the key.
Beep
Exterior: Beeps three
times
Interior: Rings once
Exterior: Beeps twice
Interior: Rings once
is pressed, the doors will be