Lexus LX570 Manual page 541

Hide thumbs Also See for LX570:

Table of Contents

Repeat the steps above to program another device for each of

the remaining HomeLink

LX570_U (OM60F86U)

3-8. Other interior features

Press and hold one of the

buttons and the trans-

changes from a slow to a rapid

flash, you can release both buttons.

If the HomeLink

comes on but does not flash,

flashes rapidly for 2 seconds

and remains lit, the HomeLink

button is already programmed.

Use the other buttons or follow

"Reprogramming

tions. (P. 543)

Test the HomeLink

pressing the newly programmed

If a HomeLink

programmed for a garage door,

check to see if the garage door

opens and closes. If the garage

door does not operate, see if your

remote control transmitter is of the

rolling code type. Press and hold

the programmed HomeLink

ton. The remote control transmitter

is of the rolling code type if the

indicator light flashes

rapidly for 2 seconds and then

remains lit. If your transmitter is of

the rolling code type, proceed to

the heading "Programming a roll-

ing code system".

indicator light

button" instruc-

operation by

button has been