Profinet Cables - Siemens SINUMERIK 840D sl Manual

Connecting
7.7 PROFINET
Cable specification
For PROFINET, you always require a data transmission rate of 100 Mbit/s (Fast Ethernet) in
full duplex mode. For data transfer purposes, you can use twisted-pair copper cables (4-wire,
100Base-T).
Table 7-15
Characteristic
Connector type
Cable type
Max. cable length
*) Please use the Fast Connect connector as outlined in the chapter titled "PROFINET
cables (Page 60)".
7.7.2

PROFINET cables

Cable and connector types
Note
For connecting PROFINET to the NCU we recommend using a connector with a 145° cable
outlet (IE FC RJ45 plug 145).
Figure 7-7
Table 7-16
Connector
IE FC RJ45 plug 145
Table 7-17
Cable
IE FC Cable GP 2 (Type A)
IE FC Flexible Cable GP 2
(Type A)
60
Cable specification for X150 ports 1, 2
RJ45 PN connector with a 145°cable outlet
Connector types for PROFINET
Designation
RJ45 PN connector with angled
exit
Cable types for PROFINET
Designation
4-wire, shielded TP installation cable for IE FC
RJ45
4-wire, shielded flexible TP installation cable for
IE FC RJ45
Version
RJ45 jack *)
Industrial Ethernet cable (CAT5)
100 m
Order number
6GK1 901-1BB30-0AA0/
6GK1 901-1BB30-0AB0
NCU 7x0.3 PN, NCU 7x0.3B PN
Manual, 06/2014, 6FC5397-1EP40-5BA1
Order number
6XV1 840-2AH10
6XV1 870-2B