HP Pavilion 15-bc200 Maintenance And Service Manual page 70

1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the base enclosure (see
components:
a. Display assembly (see
b. Hard drive (see
c. SSD (see
d. Memory (see
e. WLAN module (see
f. Battery (see
g. USB (see
h. Power button board (see
i. Fan (see
j. Heat sink for discrete graphics (see
k. Heat sink for CPU and graphics (see
l. System board (see
m. RTC battery (see
n. Power connector (see
o. TouchPad (see
Remove the display panel:
1. Slide a nylon flake tool (1) around the outer edge of the bezel to release the bezel from the screen (2).
62 Chapter 5 Removal and replacement procedures for authorized service provider parts
Base enclosure on page
Display assembly on page
Hard drive on page
SSD (M.2) on page 33).
Memory on page 34).
WLAN module on page
Battery on page 39).
USB board on page 42).
Power button board on page
Fan on page 45).
System board on page
RTC battery on page
Power connector on page
Power connector on page
27), and then remove the following
29).
31).
37).
43).
Heat sink for discrete graphics memory on page
Heat sink for CPU and graphics on page
53).
55).
56).
56).
46).
48).