Other Functions - Philips VR140/07 Operating Manual

How to change a programmed
recording (TIMER)
1.
1.
Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2.
2.
Press . The main menu will appear.
MENU
3.
3.
Select 'TIMER' with
Then press
FWD 1- B
4.
4. Select ONCE, DAILY, or WEEKLY recording
with or
PLAY B-K
.
FWD
1- B
5.
5. Select a TIMER block with
number indicates an empty TIMER block.)
ONCE
TIMER - 1 2 3 4 5 6 7 8 -
SELECT TIMER NUMBER
END=EXIT
6.
6.
Press
CLEAR to delete information and input
correct information with
.
or
0..9
7.
7. To end, press
STATUS/EXIT
8.
8.
Switch off with
STANDBY/ON y y

8. Other Functions

Switching the status display off or
on
Along with the on screen menu, the status dis-
play also displays information on the current
operating status (counter, playback, recording,
TV channel, etc.) on the TV screen. You can
switch off the information about the operating
status so that the status display is not recorded
when copying videocassettes.
1.Switch on the TV set. If required, select the
1.
programme number for the video recorder.
2.Press . The main menu will appear.
2.
MENU
3.Select 'VCR SET UP' with
3.
and confirm with
FWD 1- B
4.Select 'STATUS DISPLAY' with
4.
STOP C-L .
or
PLAY B-K STOP C-L
.
. Then press
STOP C-L
. (The flashing
0..9
or
PLAY B-K STOP
.
.
PLAY B-K or STOP C-L
.
PLAY B-K
Helpful Hints
Error message: ' ' will flash in the video
recorder display
•
No cassette was inserted. Insert a cassette and
.
switch off the video recorder using
•
A cassette was inserted with the security tab
removed.
Undo the erase protection (chapter 'Manual
Recording', section 'Preventing accidental erasing of
cassettes') or insert a different cassette.
Cassette is ejected during recording
•
The end of the tape was reached during recording.
The video recorder does not react
•
While a programmed recording is being made, you
cannot operate your video recorder manually. If you
want to cancel the programmed recording, press
STOP/EJECT
•
The end of the tape was reached during recording.
C-L
SELECT K L CHOOSE B
END=EXIT
5.Select 'ON' or 'OFF' with
5.
Which settings can I choose?
'ON': Shows the status display for a few sec-
onds only.
'OFF': Switches off the status display.
6.To end, press
6.
or
13
.
STATUS DISPLAY [ON]
BLUE BACKGROUND[ON]
AUTO STANDBY [OFF]
CLOCK DISPLAY [ON]
FWD 1- B
.
STATUS/EXIT
STANDBY/ON y y
.
EN