Basic Functions; Switching On/To Standby And Selecting Functions; Volume Control; Mute - Magnavox MAS65 User Manual

Switching on/to standby and
selecting functions
1
Press STANDBY-ON to switch on.
➜
The display lights up blue.
➜
The system switches to the last source
selected.
2
To select your function, press TUNER.
CD /É Å or TAPE.
3
Press STANDBY-ON to switch the system to
standby.
➜
The clock is displayed.
STANDBY-ON
TUNER
IMPORTANT!

– Adjust the volume to a moderate level

before you switch the system to standby
mode.
Helpful hints:
– In the standby mode, the tone, sound settings,
tuner presets, and the volume level will be
retained in the system's memory.

Volume control

1
Check the system is switched on.
2
Adjust the volume with VOLUME rotary (on
the remote control, press VOL 5/∞).
➜
Display shows
39 ( : the lowest volume and
highest volume)
IMPORTANT!
– Adjust the volume to a moderate level
before you switch the system to standby
mode or plug in the headphones.

MUTE

During playback, you can temporarily switch off
the sound without switching off the set.
1
On the remote control, press MUTE to
switch off the sound.
AUX MUTE
CD/ TAPE
and a number from 01 -
: the

Basic Functions

➜
Display shows MUTE.
Playback continues without sound.
2
To switch on the sound, press MUTE again or
adjust the volume with VOLUME rotary (on
the remote control, press VOL 5/∞).
STANDBY-ON
TUNER
PRESET
SHUFFLE
ALBUM
1
4
7
9

Sound control

DSC (Digital Sound Control)

Digital Sound Control enables you to select
predefined sound settings.
●
Press DSC repeatedly to select your desired
sound setting:.
➜
ROCK, JAZZ, POP or CLASSIC is
displayed.

DBB (Dynamic Bass Boost)

●
On the system, press DBB once or more to
turn bass enhancement on or off .
➜
DBB appears when DBB is activated.
Helpful hints:
– Some discs or tapes might be recorded in high
modulation, which causes a distortion at high
volume. If this occurs, switch off DBB or reduce the
volume.
STANDBY-ON
AUX MUTE
CD/ TAPE
PROG
REPE AT CLOCK
DSC
2 3
5 6
8
VOL
0
13