Ibm Ppr Setup - Oki c332 User Manual

IBM PPR S
ETUP
ITEM
CHARACTER PITCH
FONT CONDENSE
CHARACTER SET
SYMBOL SET
LETTER O STYLE
ZERO CHARACTER
LINE PITCH
WHITE PAGE SKIP
CR FUNCTION
LF FUNCTION
LINE LENGTH
FORM LENGTH
TOF POSITION
LEFT MARGIN
FIT TO LETTER
TEXT HEIGHT
SETTINGS EXPLANATION
10 CPI Specifies character pitch in IBM PPR emulation.
12 CPI
17 CPI
20 CPI
PROPORTIONAL
12CPI TO 20CPI Specifies 12CPI pitch for Condense Mode.
12CPI TO 12CPI
SET-2 Specifies a character set.
SET-1
IBM-437 Specifies a symbol set.
(Default Symbol
Set only shown)
ENABLE Specifies the style that replaces 9BH with letter o
and 9DH with a zero.
DISABLE
NORMAL Sets the zero to be slashed or unslashed.
SLASHED
6 LPI Specifies the line spacing.
8 LPI
ON Selects whether blank pages are printed or not.
OFF
CR Selects whether a received carriage return
character (0Dh) also causes a line feed.
CR+LF
LF Sets performance when LF code is received.
LF+CR
80 COLUMN Specifies the number of characters per line.
136 COLUMN
11 INCH Specifies the length of paper.
11.7 INCH Note: The default setting varies depending on the
sales area.
12 INCH
0.0 INCH Specifies the distance of print from the top edge
of the paper.
0.1 INCH
~
1.0 INCH
0.0 INCH Specifies the distance of print from the left hand
edge of the paper.
0.1 INCH
~
1.0 INCH
ENABLE Sets the printing mode that can fit print data,
equivalent to 11 inches (66 lines), in the LETTER-
DISABLE
size printable area.
Note: The default setting varies depending on the
sales area.
SAME Sets the height of a character.
DIFF SAME: Regardless of CPI, same height.
DIFF: As CPI, character heights vary.
Operator panel > 43