Multi-Channel Television Sound (Mts) 49 - Magnavox 27MDTR20 User Manual

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 49
You can set the TV/VCR/DVD to receive or record TV
programs in Stereo, Second Audio or Monaural Sound. Also,
you can set the TV/VCR/DVD to play videotapes in either
High Fidelity (HIFI) or Monaural (MONO or single-channel)
sound. See pages 50-51 on how to set the sound mode.
1
Press DISPLAY to see the sound status. During
TV viewing, press DISPLAY twice. During tape
playback, press DISPLAY once.
STOP
HIFI
SP COUNT
When a TV program is broadcast in stereo, STEREO
appears in the top right corner of the screen.When a
TV program is broadcast in second audio, SAP appears
in the top right corner of the screen.When a TV
program is broadcast both in stereo and second audio,
STEREO and SAP both appear.
Although a program may be broadcast in both stereo
and second audio, you cannot record in both stereo
and second audio at the same time.
During tape playback, HIFI will appear in the top left
corner of the screen if VCR AUDIO is set to HIFI.
Details are on page 50. If you play non-HIFI tapes while
VCR AUDIO is set to HIFI, HIFI will disappear from
the screen.The videotape will play in monaural sound.
You must set the TV/VCR/DVD to record in either
STEREO or SAP. Do this by changing the TV AUDIO
setting as described on page 51.

Multi-Channel Television Sound (MTS) 49

12:00AM
CH 123
STEREO/SAP
0:00:00
STANDBY-ON PICTURE SLEEP SELECT
1 2 3
CH.
4 5 6
7 8 9
VOL.
+100
0 +10
SPEED C.RESET
ZOOM
MUTE
PLAY
STOP
DISC
RECORD
MENU
1
DISPLAY
ENTER
SETUP TITLE RETURN
REPEAT
CLEAR SEARCH MODE REPEAT
A-B
MODE AUDIO SUBTITLE ANGLE