Optional Connections 11 - Magnavox 27MDTR20 User Manual

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 11
Digital Stereo Hookups
You can connect the TV/VCR/DVD to a Stereo
that has a Digital Coaxial In jack. Use this
hookup if you want to hear the TV/VCR/DVD
sound through the Stereo instead. Use these
connections for a Dolby Digital-compatible
Stereo or for a Receiver that has a Mini-Disc or
Digital Audio Tape deck.
1
Connect the antenna/Cable TV
signal. Details are on pages 9-10.
2
Connect a digital audio coaxial
cable (not supplied) to the AUDIO
OUT COAXIAL jack on the
TV/VCR/DVD.
Also connect the cable to the
Stereo's COAXIAL DIGITAL
AUDIO IN jack.
3
If the Stereo is Dolby
Digital-compatible, set DOLBY
DIGITAL to BITSTREAM. If the
Stereo is not Dolby Digital-compatible
or if you connected to a Mini-Disc or
Digital Audio Tape Deck, set DOLBY
DIGITAL to PCM. Details are on page 72.
An incorrect setting causes noise
distortion and damages speakers.

Optional Connections 11

AUDIO OUT
ANT.
COAXIAL
To Stereo's
COAXIAL DIGITAL AUDIO IN jack
Helpful Hints
• You cannot use a Mini-Disc or
Digital Audio Tape deck to
copy Dolby Digital 5.1 channel
surround sound discs.
• If the disc is not recorded in
Dolby Digital 5.1 channel
surround sound, you will not
hear multi-channel sound even
if you use the Digital Stereo
hookup.
• To see if your disc is recorded
in Dolby Digital, look for a
Dolby Digital logo on disc or
on its case.
• To see if your Stereo has
Dolby Digital, look for a Dolby
Digital logo on your Stereo.
Or, refer to the Stereo
owner's manual.
To AUDIO OUT
COAXIAL jack
on TV/VCR/DVD
AUDIO OUT
COAXIAL