One-Touch Recording - Magnavox 27MDTR20 User Manual

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 28

28 One-Touch Recording

A One-Touch Recording (OTR) is an immediate timed
recording from 30 minutes to 8 hours long.
Before you begin ...
● Turn on the TV/VCR/DVD.
Press SELECT to put the unit in TV/VCR mode.
●
The red VCR/TV light will appear on the front of the unit.
Insert a videotape with its erase prevention tab in place.
●
Details are on page 8.
Press the Number buttons or CH. ▲/▼to select
1
the channel you want to record.
Remember, if the TV/VCR/DVD is connected to a
Cable Box/Satellite Receiver, the TV/VCR/DVD must
be on channel 3, 4 or AUX.
Select the channel you want to record at the Cable
Box/Satellite Receiver. Details are on page 9.
2
Press SPEED to select a tape recording speed
(SP or SLP). Details are on page 27.
3
Press REC/OTR I on the front of the
TV/VCR/DVD repeatedly to select a recording
length. Recording will start immediately.
Each press of REC/OTR I will increase the recording
time by 30 minutes.The maximum recording length is
8 hours.
OTR (2:30)
SP
4
Press STOP C to stop a one-touch recording
before its designated end time. Otherwise,
recording will stop at the time you designated.The
TV/VCR/DVD will turn off when the OTR ends.
STANDBY-ON PICTURE SLEEP SELECT
1 2 3
CH.
4 5 6
7 8 9
VOL.
+100
0 +10
2
SPEED C.RESET ZOOM
MUTE
PLAY
STOP
DISC
RECORD
MENU
DISPLAY
ENTER
SETUP TITLE RETURN
CLEAR SEARCH MODE REPEAT REPEAT
A-B
AUDIO SUBTITLE ANGLE
MODE
3
Press REC/OTR I on the
front of the TV/VCR/DVD.
Helpful Hints
• You cannot start an OTR with
the RECORD button on the
remote control.
• To show the remaining
recording time, press DISPLAY.
OTR and the remaining
recording time will appear
briefly in the top left corner of
the screen.
• If the tape ends before the
recording's end time, the
TV/VCR/DVD will stop
recording, eject the tape, and
turn itself off.
• An OTR will continue even if
you turn off the TV/VCR/DVD.
The flashing REC/OTR light
indicates the recording is still in
progress.
• To change the recording length
while an OTR is in progress,
press REC/OTR I repeatedly.
• You cannot pause an OTR.
• If the preset time for a timer
recording comes up during an
OTR, the OTR has priority.The
timer recording will not take
place.
1
4