Lexus LS460 Owner's Manual page 911

2
Connect the jumper cables according to the following procedure:
Left-hand drive vehicles

Right-hand drive vehicles

1
Connect a positive jumper cable clamp to the positive (+) bat-
tery terminal on your vehicle.
2
Connect the clamp on the other end of the positive cable to the
positive (+) battery terminal on the second vehicle.
3
Connect a negative cable clamp to the negative (-) battery ter-
minal on the second vehicle.
4 Connect the clamp at the other end of the negative cable to a
solid, stationary, unpainted metallic point away from the bat-
tery and any moving parts, as shown in the illustration.
LS460_EE (OM50D49E)
7-2. Steps to take in an emergency
881
7