168
3-3. Adjusting the seats
Driving position memory
This feature automatically adjusts the front seats, steering wheel,
outside rear view mirrors and height of seat belt shoulder anchor to
suit your preferences.
Driving position memory
Your preferred driving position (the position of the driver's seat,
steering wheel, outside rear view mirrors and height of seat belt
shoulder anchor) can be recorded and recalled by pressing a switch.
Three different driving positions can be recorded into memory.
Recording procedure
1
Check that the shift lever is in P.
2
Turn the engine switch to IGNITION ON mode.
3
Adjust the driver's seat, steering wheel, outside rear view mir-
rors and seat belt shoulder anchor height to the desired posi-
tions.
4
Press the "SET" switch,
then within 3 seconds press
switch "1", "2" or "3" until
the buzzer sounds.
If the selected switch has
already been preset, the previ-
ously recorded position will be
overwritten.
To record the position of the front passenger's seat, adjust the
front passenger's seat to the desired position and perform step
using the switches on the front passenger's side.
LS460_EE (OM50D49E)
4