Lexus LS460 Owner's Manual page 66

66
1-1. For safe use
Key of letters inserted in the above table:
U: Suitable for "universal" category child restraint systems
approved for use in this mass group.
UF: Suitable for forward-facing "universal" category child
restraint systems approved for use in this mass group.
L: Suitable for child restraint systems shown in the child restraint
system list.
X: Not suitable seat position for children in this mass group.
1
* : Adjust the front seatback to the most upright position. Move the front seat
to the rearmost position.
If the head restraint interferes with your child restraint system, and the
head restraint can be removed, remove the head restraint.
If the passenger seat is equipped with a vertical height adjuster, it must be
placed in the upper most position.
Follow these procedures:
• For installing a baby seat with support base
If the baby seat interferes with the seatback when latching the baby seat
into the support base, adjust the seatback rearward until there is no inter-
ference.
• For installing a forward-facing child seat
If there is gap between the child seat and the seatback, tilt the seatback
rearward until good contact is achieved.
If the seat belt shoulder anchor is ahead of the child seat belt guide, move
the seat cushion forward.
• For installing a junior seat
If the child in your child restraint system is in a very upright position,
adjust the seatback to the most comfortable position.
If the seat belt shoulder anchor is ahead of the child seat belt guide, move
the seat cushion forward.
2
* : If the head restraint interferes with your child restraint system, and the
head restraint can be removed, remove the head restraint.
The child restraint system mentioned in the table may not be avail-
able outside of the EU area.
LS460_EE (OM50D49E)