Using The Door Lock Switch; Recall Procedure; Cancelation Procedure - Lexus LS460 Owner's Manual

Hide thumbs Also See for LS460:
Table of Contents

Advertisement

172
3-3. Adjusting the seats

Using the door lock switch

Carry only one of the keys (including the card key) to which you
want to link the driving position. If 2 or more keys are in the
vehicle, the driving position cannot be linked properly.
1
Turn the engine switch off and close the driver's door.
2
While pressing the recalled
switch, press and hold the
door lock switch (either
lock or unlock) until the
buzzer sounds.

Recall procedure

1
Carry the electronic key that has been registered to the driving
position, and then unlock and open the driver's door using the
smart entry & start system or wireless remote control.
The driving position will move to the recorded position (not including
the steering wheel). However, the seat will move to a position slightly
behind the recorded position in order to make entering the vehicle eas-
ier.
If the driving position is in a position that has already been recorded,
the seat and outside rear view mirrors will not move.
2
Turn the engine switch to ACCESSORY mode or fasten your
seatbelt.
The seat and steering wheel will move to the recorded position.

Cancelation procedure

Using the wireless remote control
1
Turn the engine switch off and close the driver's door.
2
While pressing the "SET" switch, press
remote control until the buzzer sounds.
LS460_EE (OM50D49E)
on the wireless

Advertisement

Table of Contents
loading

Table of Contents