5-6. Using the hands-free phone system (for cellular phone)
2
Select the desired message.
Select "Send".
While the message is being sent,
a sending message screen is dis-
played.
To check the message
Messages are displayed in the appropriate connected Bluetooth
registered mail address folder. Select the tab of the desired folder to be dis-
played.
Only received messages on the connected Bluetooth
played.
When the received message is an e-mail and "Update read status on tele-
phone" is set to "On", "Mark as unread" or "Mark as read" can be selected.
Select "Mark as unread" to mark mails that have been read on the Blue-
®
tooth
phone as unread. Conversely, select "Mark as read" to mark mails
that have not been read on the Bluetooth
Calling using SMS/MMS message
You can call using the SMS (Short Message Service)/MMS (Multimedia
Messaging Service) message sender's phone number. (P. 653)
If the message delivery failed
If message delivery has failed, a notification will be displayed on the screen.
Select "Retry" to attempt to send the message again or select "Cancel" to
cancel.
Editing a quick reply message
You can edit the "Quick Reply Messages". (P. 685)
New message notification
If "New message pop-up" and "New message voice notification" are set to
"On", a notification appears on the screen and a voice notification will be
heard when a new message arrives, select "Read" to check the message, also
to check the message later, select "Ignore". When "Automatic message read-
out" is set to "On", the message will be automatically read out. (P. 683)
LS460_EE (OM50D49E)
®
phone can be dis-
®
phone as read. (P. 683)
663
®
phone's
5