Only The Power Light Is On; Error Light Is Flashing Or On - Epson STYLUS COLOR 680 Manual

Only the power light is on

Try one or more of these solutions:
❏ Turn off the printer and computer. Make sure the printer's
interface cable is securely plugged in.
❏ Make sure there is no packing material in the printer.
❏ Turn off the printer and computer and disconnect the
printer's interface cable. Then, print an operation check page.
See "Running a printer operation check" on page 9-7.
If the check page prints correctly, make sure the printer
software and your application are installed correctly.
❏ If you are trying to print a large image, your computer may
not have enough memory to print. Try printing a smaller
image.
❏ If you are using Windows NT 4.0, try to uninstall the EPSON
Printer Port. Click Start, point to Programs and then to
EPSON Printers, then click EPSON Printer Port Uninstall.
Follow the on-screen instructions.
❏ Clear any stalled print jobs from the Spool Manager. For
instructions, see "Using EPSON Spool Manager" on page
9-12.
❏ If the printer sounds like it is trying to print, but is unable to,
run the Head Cleaning utility.
If this doesn't work, replace the ink cartridges. See "Replacing
an Ink Cartridge" on page 7-1 for instructions.

Error light is flashing or on

Check EPSON Status Monitor 3 or EPSON StatusMonitor to find
the cause of the error, then try one or more of these solutions:
Troubleshooting
9-21