Epson STYLUS COLOR 680 Manual page 148

1. Open the printer cover and make sure that the print head is
in the home (far right) position. If not, plug in the printer and
wait until the print head returns to the home position. Then
close the printer cover and unplug the printer.
c
2. Disconnect the interface cable from the printer.
3. Remove the paper from the sheet feeder and remove the paper
support.
4. Open the printer cover again. Secure the ink cartridge holder
to the printer with tape as shown below, then close the printer
cover.
5. Raise the output tray.
6. Attach the protective materials to both sides of the printer.
7. Repack the printer and power cord in the original box.
8. Keep the printer level during transport.
8-12
Maintenance
Caution:
Leave the ink cartridges installed when you transport the
printer. Removing the cartridges during transport can
damage the printer.