Auto Power Off Function; Steering Lock - Toyota C-HR 2017 Owner's Manual

Hide thumbs Also See for C-HR 2017:
Table of Contents

Advertisement

240
4-2. Driving procedures

Auto power off function

Vehicles with a Multidrive:
If the vehicle is left in ACCESSORY mode for more than 20 minutes or IGNI-
TION ON mode (the engine is not running) for more than an hour with the
shift lever in P, the engine switch will automatically turn off.
Vehicles with a manual transmission:
If the vehicle is left in ACCESSORY mode for more than 20 minutes or IGNI-
TION ON mode (the engine is not running) for more than an hour, the engine
switch will automatically turn off.
However, this function cannot entirely prevent battery discharge. Do not leave
the vehicle with the engine switch in ACCESSORY or IGNITION ON mode for
long periods of time when the engine is not running.
Electronic key battery depletion
P. 148
Conditions affecting operation
P. 174
Notes for the entry function
P. 175
If the engine does not start
The engine immobilizer system may not have been deactivated. (P. 87)
Contact any authorized Toyota retailer or Toyota authorized repairer, or any
reliable repairer.
Vehicles with a Multidrive: Check that the shift lever is securely set in P. The
engine may not start if the shift lever is displaced out of P.
"Shift to P position to Start." will be displayed on the multi-information dis-
play.

Steering lock

After turning the engine switch off and opening and closing the doors, the
steering wheel will be locked due to the steering lock function. Operating the
engine switch again automatically cancels the steering lock.
When the steering lock cannot be released
"Push ENGINE Switch while Turning The
Steering Wheel in Either Direction." will be
displayed on the multi-information display.
Check that the shift lever is set in P (Multi-
drive). Press the engine switch while turn-
ing the steering wheel left and right.
C-HR_OM_Europe_OM10528E

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents