G Slow Motion; G Repeat; G Repeat A-B; G Time Search - Philips DVP 3055V Owner's Manual

General Features (continued)
DVD
VCD2.0
Slow Motion
1
Press T during still mode.
The player will enter SLOW mode.
2
Press T repeatedly to select the required speed :
T 1/7, T 1/6, T 1/4 or T 1/2 (forward).
3
To exit slow motion mode, press PLAY B.
Note
G Slow motion playback in reverse is not applicable.
DVD
VCD2.0 VCD1.1
Repeat
Chapter Title
Track
DVD Video Discs - Repeat Chapter/Title/Off
1
To repeat the currently playing chapter, press REPEAT.
The Repeat Chapter icon appears on the TV screen.
2
To repeat the title currently playing, press REPEAT a
second time.
The Repeat Title icon appears on the TV screen.
3
To exit Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the TV screen.
Video CDs, - Repeat Track/All/Off
1
To repeat the track currently playing, press REPEAT.
The Repeat Track icon appears on the TV screen.
2
To repeat the disc currently playing, press REPEAT a
second time.
The Repeat All icon appears on the TV screen.
3
To exit Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the TV screen.
Note
On a Video CD with PBC, you must set PBC to Off on
the setup menu to use the Repeat function. See page 19.
Operation with DVD and Video CD
VCD1.1
All Off
DVD
VCD2.0
Repeat A-B
A - B
A -
Off
To repeat a sequence in a title:
1
Press REPEAT A-B at your chosen starting point.
A * appears briefly on the TV screen.
2
Press REPEAT A-B again at your chosen end point.
A B appears briefly on the TV screen, and the repeat sequence
begins.
3
To cancel the sequence, press REPEAT A-B.
DVD
VCD2.0
Time Search
0:20:09 -:- -: --
The Time Search function allows you to start playing at
any chosen time on the disc.
1
Press DISPLAY during playback.The on-screen display
appears on the screen.
The Time Search box shows the elapsed playing time of the
current disc.
2
Within 10 seconds, press 3/4 to select the Time Search
icon in the on-screen display.
The "-:--:--" appears in the Time Search box.
3
Within 10 seconds, use the number buttons to enter the
required start time. Enter hours, minutes, and seconds
from left to right in the box.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered.Then enter the correct numbers.
4
Within 10 seconds, press OK to confirm the start time.
Playback starts from the selected time on the disc. If you enter an
invalid time, playback will continue from the current point.
Screen Saver
A screen saver image appears when you leave the DVD
Player in stop mode for about fifteen minutes.
VCD1.1
VCD1.1
(PBC:Off)
25