How To Using The Main Menu; Tuning In Tv Stations Automatically - Philips DVP 3055V Owner's Manual

Before Operation - VCR part

How to using the main menu

This VCR can easily be programmed by using the menus
displayed on screen.
The menus are controlled from the Remote Control
Handset.
1
Switch on your TV set and video recorder by pressing the
1 1 button.
2 Press SYSTEM MENU button.
The main menu will appear on the TV screen.
1 2
Pr-12
P SET SET
REC
ACMS
R
f
OSD + -
OSD
ON DECO-
AUD OFF DER
G REC - Timer recording setting (see p. 23).
G PR SET - Manual tuning setting (see p. 15).
G ACMS - ACMS (Automatic Channel Memory System)
(see p. 14).
G SET - Date & clock setting (see p. 13).
G SYSTEM - To set the Colour TV System (see p. 13).
RF AUDIO - To select the channel of audio output
according to your TV type ("I/I" for PAL
I/I TV, "B/G" for PAL B/G TV, "D/K" for
PAL D/K TV) (see p. 13).
G Dr. - To check a problem with your VCR (see p. 31).
G AUDIO - To select the channel for audio output
(see p. 32).
G F.OSD ON/OFF - To display the operational
mode of your VCR (see p. 31).
G 16:9/4:3 - To select the aspect ratio of your TV
(see p. 32).
G DECODER - To use a pay-TV decoder (or Satellite)
with your VCR (see p. 32).
G OPR - To improve the playback picture (see p. 21).
G NIC - To activate or deactivate the NICAM digital
sound (see p. 32).
Tip
You can change the menu language on the DVD setup menu.
(See the Menu Language on page 18.)
3
Press 1 and 2 to select the desired menu.
Press OK and use 3 or 4 to select.
4 Press SYSTEM MENU to return to a TV picture.
14
SYS
REC
NIC
OK i
Tuning in TV Stations
Automatically
If the TV broadcast signal is weak your VCR may not
detect the necessary information and will not be able to
store them correctly.To overcome this problem please
turn to the MANUAL TUNING section on page 15.
1 Press 1 1 to turn on your VCR.
2
Press SYSTEM MENU button.
The main menu will appear on the TV screen.
Press 1 or 2 to select the ACMS.
Press OK.
1 2
Pr-12
P SET SET
REC
ACMS
R
f + -
OSD OSD
ON DECO-
AUD OFF DER
ACMS
Pr-12
ACMS
3
Press OK again to start the automatic tuning process.
01 C02
02 C03
03 C04
S
Pr-12
ACMS
4 The TV STATION TABLE will appear when tuning is
complete.
Press SYSTEM MENU to save your settings.
01 C02
02 C03
03 C04
04 C05
05 C06
06 C07
07 C08
08 C09
P SET
R
SYS
Pr-12
NIC ACMS
OK i
OK i
00
00
00
E
i
00
00
00
00
00
00
00
00
MOVE :
DELETE : , OK i