Connections; Connecting To A Tv & Decoder - Philips DVD755VR/00 Owner's Manual

Connections

Tips
Depending on your TV and other equipment you wish to
connect, there are various ways you could connect the
unit.
Please refer to the manuals of your TV, Stereo System or
other devices as necessary to make the best connections.
For better sound reproduction, connect this unit's AUDIO
OUT jacks to the audio in jacks of your amplifier, receiver,
stereo or audio/video equipment. See "Connecting to
optional equipment" on page 11.
Caution
– Make sure this unit is connected directly to the TV. Set the
TV to the correct video input channel.
– Do not connect this unit's AUDIO OUT jack to the
phono in jack (record deck) of your audio system.
Connecting to a TV & Decoder
Make one of the following connections, depending on the
capabilities of your existing equipment.
Basic connection (AV)
Connect the EURO AV1 AUDIO/VIDEO on the rear
1
panel of this unit to the SCART input socket on the TV
using a SCART lead.
Some TV broadcasters transmit encoded television signals
2
which you can only see with a purchased or rented
decoder.You can connect such a decoder (descrambler) to
the DVD+VCR.
Basic connection (RF)
Connect the RF antenna cable from your indoor/ outdoor
1
antenna to AERIAL jack on the rear panel of this unit.
Connect the supplied RF antenna cable from the RF OUT
2
(DVD/VCR OUT) jack on the rear panel of this unit to
your television's Antenna Input.
10
VCR IN+OUT/DVD OUT
AERIAL
EURO AV2
DECODER
EURO AV1
RF OUT
AUDIO/
VIDEO
DVD/VCR
OUT
DVD
DVD/VCR
EXCLUSIVE
OUT
AUDIO OUT
AUDIO
OUT
R
R
L
L
COAXIAL