Registering An Account - Konftel 300IP Installation And Administration

INStALLAtIoN

REgIStERINg AN ACCouNt

The conference phone can be registered in a company SIP PBX or with a public IP
telephony service provider. You can store settings for two accounts in Konftel 300IP. To
register your phone, you must have access to the account information and all necessary
settings that the SIP PBX or service provider requires.
See the heading "SIP" on page 17 for a detailed description of all settings.
 Select Settings > SIP.
 Click Yes at Enable account under Account 1.
 Enter the account information you have received.
 Account name can be chosen freely and is the name or phone number you want to
appear in the phone display.
 Leave the default values if you have no other information.
 Select a method of NAT traversal if you got information of this.
12
 Select a different transport protocol if you got information of this. See page 20
about using a secure transport protocol.
 Save the settings by clicking the Save button.
Konftel 300IP responds by showing REGISTERING. Your selected account name appears at the
bottom of the display with a filled square in front, if the registration is successful.
Make media settings
 Select a different codec priority, if you do not accept the default settings. See page
24.
 Select a SRTP option if you need a secure media protocol. See page 25. Note that
this also requires a corresponding transport setting on the SIP tab.
INStALLAtIoN
13