Using A Configuration File - Konftel 300IP Installation And Administration

PRovISIoNINg – uPgRADE AND CoNFIguRAtIoN
When installation is complete, the text "Upgrade Complete. The unit will be
rebooted." is shown in your browser, and after a while you hear the Konftel music
signature, which indicates that the conference phone has started.
upgrading from downloaded file
It is possible to download a firmware file from www.konftel.com/300ip, and install it
into the Konftel 300IP from the local hard disk.
 Download the firmware file from www.konftel.com/300ip.
 Click on the browse... button and locate and choose the downloaded file.
 Click on the Check Now button.
After upgrading
If DHCP is used in the network, the IP address may have been changed. If the web
browser looses contact with Konftel 300IP, check the IP address on the conference
phone (see "USING THE WEB INTERFACE" on page 6).
32
PRovISIoNINg – uPgRADE AND CoNFIguRAtIoN

uSINg A CoNFIguRAtIoN FILE

It is possible to save a configuration xml file to be used as:
• Backup (i.e. if the system has been reset to factory default)
• Configuration interface (there are some settings that are not configurable via the
web interface)
• Management tool (export, edit, and import settings to a set of phones instead of
doing the settings on each phone)
The structure of the xml file is as follows:
<locale>
<region>
<logging>
<level> The phone application logs messages to log facility LOCAL0.
Log level 1–5 (equivalent to Fatal–Trace)
<log_sip> Log sip messages to log facility LOCAL1. Default is true.
<remote_log> Log messages to a remote log server. Default is false.
<remote_host /> Remote log server.
<network>
<net>
<dhcp> Specify if DHCP should be used to obtain network settings. If so, the
other network settings won't be used.
<ip> Specify the IP address of the KT300IP.
<netmask> The netmask of the IP address.
<gateway> Specify the default gateway to be used.
<dns /> Specify at most two Domain Name Servers to be used.
<dns />
<hostname> Specify host name.
<domain /> Specify domain name.
<time>
<ntp>
<timezone>
<daylight_save>
<ntps>
33