Tagging - Emerson Rosemount 2051 Quick Start Manual

Quick Start Guide
Keep the vent path free of any obstruction, including but not limited to paint,
dust, and lubrication by mounting the transmitter so fluids can drain away.
Figure 4. In-line Gage Low Side Pressure Port
A. Pressure port location

3.0 Tagging

3.1 Commissioning (paper) tag
To identify which device is at a particular location use the removable tag provided
with the transmitter. Ensure the physical device tag (PD tag field) is properly
entered in both places on the removable commissioning tag and tear off the
bottom portion for each transmitter.
Note
The device description loaded in the host system must be at the same revision as this
device, see "System readiness" on page
Figure 5. Commissioning Tag
Commissioning Tag
DEVICE ID:
0011512051010001440 -12169809172
DEVICE REVISION: 1.1
PHYSICAL DEVICE TAG
DEVICE ID:
0011512051010001440 -12169809172
Device Barcode
DEVICE REVISION: 1.1
S / N :
PHYSICAL DEVICE TAG
A. Device revision
8
A
3.
Commissioning Tag
DEVICE ID:
001151AC00010001440-12169809172
DEVICE REVISION: 2.1
PHYSICAL DEVICE TAG
A
DEVICE ID:
001151AC00010001440-12169809172
Device Barcode
DEVICE REVISION: 2.1
S / N :
PHYSICAL DEVICE TAG
September 2016