Quick Start Guide
2.0 Mount the transmitter
2.1 Liquid applications
1. Place taps to the side of the
line.
2. Mount beside or below the
taps.
3. Mount the transmitter so the
drain/vent valves are oriented
upward.
2.2 Gas applications
1. Place taps in the top or side of
the line.
2. Mount beside or above the
taps.
2.3 Steam applications
1. Place taps to the side of the
line.
2. Mount beside or below the
taps.
3. Fill impulse lines with water.
4
Coplanar
September 2016
In-line